Weider PRO 4250 User Manual page 7

5.
6.
See drawing A. Attach the Right Upright (2) to
the Right Base (1) with the two indicated M8 x
75ram Carriage Bolts (69) and two M6 Nylon
Locknuts (91). Do not tighten the Locknuts yet.
See drawing B. Attach the Left Upright (26) to
the Left Base (25) with the two indicated M8 x
75mm Carriage Bolts (69) and two M8 Nylon
Locknuts (91). Do not tighten the Locknuts yet.
Attach the Right Seat Frame (3) to the Right
Base (1) with the two indicated M8 x 75mm
Carriage Bolts (69) and two M8 Nylon Locknuts
(91). Do not tighten the Locknuts yet.
Attach the Right Seat Frame (3) to the Right
Upright (2) with an M8 x 78mm Bolt (82), an M8 x
96mm Bolt (83), an M8 Washer (98), and an M8
Nylon Locknut (91). Do not tighten the Locknut
yet.
5A
91
91
B
25 91
69
6
i
83 . -2
3 "i
!
69
7