Table of Contents
Advertisement
23. Wrap the Press Cable (109) around a 90mm
Pulley (63). Attach the Pulley, two Half Finger
Guards (66), a Cable Trap (68), and an M10
Washer (99) to the Left Seat Frame (27) with an
M10 x 103ram Bolt (22) and an M10 Nylon
Locknut (90). Make sure the Cable Trap and the
Finger Guards are oriented as shown.
24. Wrap the Press Cable (109) around a "V"-pulley
(62). Attach the "V_-pulley, two Half Finger Guards
(66), and two M10 Washers (99) to the Leg Press
Frame (28) with an M10 x 115mm Bolt (71) and
an M10 Nylon Locknut (90). Make sure the
Finger Guards are oriented as shown.
25. Wrap the Press Cable (109) around a 90mm
Pulley (63). Attach the Pulley, two Half Finger
Guards (66), a Cable Trap (68), and an M10
Washer (99) to the Left Upright (26) with an M10
x 108mm Bolt (72) and an M1O Nylon Locknut
(90). Make sure the Cable Trap and Finger
Guards are oriented as shown,
26. Wrap the Press Cable (109) around a 90mm
Pulley (63). Attach the Pulley, two Half Finger
Guards (66), a Cable Trap (68), and an M10
Washer (99) to the Press Frame (29) with an M10
x 135mm Bolt (70). Make sure the Cable Trap
and Finger Guards are oriented as shown.
"
90
71
_
'_"_99
99
66
66
13
Hide quick links:
Advertisement
Table of Contents
