Weider PRO 4250 User Manual page 32

PART IDENTIFICATION CHART--Model No. 831.154020 R0704A
See the drawings below to identify small parts used in assembly. The number in parentheses by each drawing is
the key number of the part, from the PART LIST in the center of this manual. Note: Some small parts may
have been pre-attached. If a part is not in the parts bag, check to see if it has been pre-attached. If a part
is missing, call toll-free 1-877-992-5999.
M6 Nylon Locknut (92)
M10 x 77ram Bolt (76)
M8 Nylon Locknut (91)
M10 Nylon Locknut (90)
M12 Nut (49)
M12 Washer (33)
M10 Large Washer (100
M4 Washer (96)
H
M6 Washer (97)
©H
M8 Washer (98)
M10 Washer (99)
M10 x 75mm Bolt (60)
M8 x 72ram Bolt (85)
M8 x 69mm Bolt (86)
M8 x 68mm Shoulder Bolt (41)
M10 x 65mm Bolt (77)
M10 x 62mm Bolt (73)
M10 x 52mm Bolt (78)
M10 x 50mm Bolt (64)
M10 x 48mm Bolt (84)