Weider 1120 User Manual page 18

ARM CONVERSION
To use the Arms (9, 10) as butterfUy arms, insert the
Arm Pins (40) into the hobs in the Upright (3) and the
Pivot Frame (5) as shown,
To use the Arms (9, 10) as press arms, insert the Arm
Pins (40) into the hobs in the Pivot Frame (5) and
Arms,
USING THE CURL PAD
To use the Curl Pad (14), remove the 50mm Round
inner Cap (30) from the Front Leg (7), insert the Curl
Post (13) into the Front Leg and secure it in pUace
with the Curl Knob (61),
Remove the Cud Pad (14) and replace the 50mm
Round Inner Cap (30) into the Front Leg (7) when
performing an exercise that does not require the Cud
Pad, Store the Cud Pad away from the weight sys-
tem,
LOCKING THE WEIGHT STACK
Lock the weight stack by inserting the Lock Pin (89)
through a Weight Guide (21) and securing the Lock
(88) onto the Lock Pin,
Hobs
21
88
89
18