Summit X650 Series Switches - Extreme Networks Summit X150 Series Installation Manual

Summit Family Switches
Table 11: LEDs on the Summit X450, X450a, and X450e Switches (Continued)
Label or Type
Stacking Port
SFP 1G Port
XENPAK 10G Port

Summit X650 Series Switches

The Summit X650 series switches provide 24 front-panel Ethernet ports that deliver 10-Gigabit Ethernet
connectivity using fixed 10GBASE-T RJ-45 ports or installable SFP+ optical modules.
The Summit X650 series switches include two base models:
Summit X650-24t switch
●
Summit X650-24x switch
●
The rear panel of the switch requires an installed option card called a versatile interface module or VIM.
The available types of VIM are:
VIM1-SummitStack versatile interface module
●
VIM1-10G8X versatile interface module
●
NOTE
VIMs are not hot-swappable. You must power off the switch before you remove or install a VIM.
A serial console port on the front panel of the Summit X650 series switch allows you to connect a
terminal and perform local management. An Ethernet management port can be used to connect the
system to a parallel management network for administration. Alternatively, you can use an Ethernet
cable to connect this port directly to a laptop to view and locally manage the switch configurations. The
Ethernet management port supports 10/100/1000 Mbps speeds. A USB port on the front panel will be
supported in a future release.
The rear panel of the switch has a replaceable versatile interface module (VIM) that provides two
40-Gigabit stacking ports and either four 1-gigabit SFP ports or eight 10-gigabit SFP+ ports. Cooling is
provided by a replaceable fan module. Two power supply bays accommodate either AC or DC power
supplies.
58
Color/State
Steady green
Blinking green
Steady green
Blinking green
Steady green
Blinking green
Off
ExtremeXOS Summit Family Switches Hardware Installation Guide
Meaning
Link OK
Activity
Link OK
Activity
Link OK
Activity
Link down