European Community - Extreme Networks Summit WM20 User Manual

Version 4.2
Hide thumbs Also See for Summit WM20:
Table of Contents

Advertisement

This equipment meets the following conformance standards:
Table 23: Canada Conformance Standards
• cULus Listed Accessory
Safety
#60950-1-03 1st edition
• ICES-003 Class B
EMC
• RSS-210
Radio
Transceiver
• RSS-139-1
• RSS-102 FR Exposure
• ID# 4141A-3502
Environmental
Operation in the 5150-5250 MHz band is limited to indoor use only to reduce potential for harmful
interference to co-channel mobile satellite systems.
The maximum antenna gain permitted for operation in the 5250-5350 MHz band to comply with the
e.i.r.p. limit is 4.3 dBi for the internal antenna and 5 dBi for the external antenna.
The maximum antenna gain permitted for operation in the 5725-5825 MHz band to comply with the
e.i.r.p. limit is 4.3 dBi for the internal antenna and 5 dBi for the external antenna.
Please note that high power radars are allocated as primary users (meaning they have priority) in
the 5250-5350 MHz and 5650-5850 MHz bands and these radars could cause interference and/or
damage to LE-LAN devices.

European Community

The Altitude 350-2 APs are wireless ports designed for use in the European Union and other countries
with similar regulatory restrictions where the end user or installer is allowed to configure the wireless
port for operation by entry of a country code relative to a specific country. Upon connection to the
switch the software will prompt the user to enter a country code. After the country code is entered, the
switch will set up the wireless port with the proper frequencies and power outputs for that country
code.
Summit WM20 User Guide, Software Release 4.2
Altitude 350-2 Int. AP (15958) AP, Altitude 350-2 Detach. AP (15939)
• Plenum Rated Enclosure
Other:
• IEEE 802.11a (5 GHz)
• IEEE 802.11b/g (2.4 GHz)
• IEEE 802.3af
See Environmental Conditions.
247

Advertisement

Table of Contents
loading

Table of Contents