Connecting The Summit Wm Controller To Your Enterprise Network; Applying The Product License Key - Extreme Networks Summit WM20 User Manual

To change the administrator password:
1 From the main menu, click Summit Switch Configuration. The Summit WM Controller
Configuration screen is displayed.
2 In the left pane, click Management Users.
3 In the user_admin table, click admin.
4 In the Modify User Password box, type the new administrator password.
5 In the Modify User Confirm Password box, type the new administrator password again.
6 Click Change Password.

Connecting the Summit WM Controller to Your Enterprise Network

Once you have modified the management port configuration settings, the next step is to connect the
Summit WM Controller to your enterprise network.
To connect the Summit WM Controller to your enterprise network:
1 Disconnect your computer from the Summit WM Controller management port.
2 Connect the Summit WM Controller management port to the enterprise Ethernet LAN. The Summit
WM Controller resets automatically.
3 Log on to the Summit WM GUI. The system is visible to the enterprise network.

Applying the Product License Key

To ensure all available system functionality is enabled, your product license key must be applied.
To apply the product license key:
1 From the main menu, click Summit Switch. The Summit WM Controller Configuration screen is
displayed.
2 In the left pane, click Software Maintenance.
3 Click the SWM Product Keys tab.
Summit WM20 User Guide, Software Release 4.2
Performing the First-Time Setup of the Summit WM Controller
41