Restoring Summit Wm Controller Software - Extreme Networks Summit WM20 User Manual

Performing System Maintenance
5 In the What to backup drop-down list, select what you want to backup:
Config's, CDRs, Logs, Audit and Rogue
●
Configurations only
●
CDRs only
●
Logs only
●
Audit only
●
Rogue only
●
6 In the Schedule task drop-down list, select the frequency of the backup:
Daily
●
Weekly
●
Monthly
●
Never
●
7 In the FTP settings section, type the following:
FTP Server – The IP of the FTP server to where the scheduled backup will be copied to.
●
User ID – The user ID that the controller should use when it attempts to log in to the FTP server.
●
Password – The corresponding password for the user ID
●
Confirm – The corresponding password for the user ID to confirm it was typed correctly.
●
Directory – The directory on the server where the image file will be stored.
●
8 To save your changes, click Save.

Restoring Summit WM Controller Software

You can restore the Summit WM Controller database.
To restore the Summit WM Controller software:
1 From the main menu, click Summit Switch. The Summit Switch Configuration screen is displayed.
2 From the left pane, click Software Maintenance. The SWM Software tab is displayed.
3 Click the Restore tab.
208
Summit WM20 User Guide, Software Release 4.2