New Hardware Found; Driver Installation Procedure; Chipset; Video - EUROCOM Multimedia PC User Manual

New Hardware Found

If you see the message "New Hardware Found" dur-
ing the installation procedure (other than when out-
lined in the driver install procedure), click Cancel
to close the window, and follow the installation proce-
dure.
Driver Installation General Guidelines
The driver installation procedure outlined in this Chapter
(and in Chapter 7 Options & Modules), are accurate at
the time of going to press.
Drivers are always subject to upgrade and revision so
the exact procedure for certain drivers may differ slight-
ly. As a general guide follow the default on screen in-
structions for each driver (e.g. Next > Next > Finish)
unless you are an advanced user. In many cases a re-
start is required to install the driver.
Make sure any modules (e.g. PC Camera, WLAN or
3.75G/HSPA) are ON before installing the appropriate
driver.


Driver Installation Procedure

Insert the Device Drivers & Utilities + User's Manual
disc into your DVD drive and click Install Drivers
(button).

Chipset

1. Click 1.Install Chipset Driver > Yes.
2. Click Next > Yes > Next > Next.
3. Click Finish to restart the computer.

Video

1. Click 2.Install VGA Driver > Yes.
2. Click Next > Yes > Next > Next.
3. Click Finish to restart the computer.

LAN

1. Click 3.Install LAN Driver > Yes.
2. Click Install > Finish.
3. The network settings can now be configured.
Driver Installation 4 - 5
Drivers & Utilities
4