New Hardware Found; Authorized Driver Message - EUROCOM LCD PC User Manual

Concise User's Guide

New Hardware Found

If you see the message "New Hardware Found"
(Found New Hardware Wizard) during the installation
procedure (other than when outlined in the driver install
procedure), click Cancel to close the window, and follow
the installation procedure as directed.

Authorized Driver Message

If you receive a message telling you that the driver you
are installing is not authorized (Digital Signature Not
Found), just click Continue Anyway to ignore the mes-
sage and continue the installation procedure.
22 - Driver Installation
Chipset (WinXP)
1. Click 1.Install Intel Chipset Utility > Yes from the
Drivers Installer menu (if you have Service Pack 1
installed do not use the Drivers Installer menu - see
.
below)
OR
Click Start (menu) > Run
D:\Drivers\Chipset\Setup.exe and click OK. If you
have Service Pack 1 installed, navigate (Browse..) to
D:\Drivers\Chip_sp1\Setup.exe.
2. Click Next > Yes > Next.
3. Click Finish to restart the computer.
Video (WinXP)
1. Click 2.Install Video Driver > Yes from the Drivers
.
Installer menu
OR
Click Start (menu) > Run
D:\Drivers\Video\Setup.exe and click OK.
2. Click Next > Yes.
3. Click Finish to restart the computer.
...
and navigate (Browse..) to
...
and navigate (Browse..) to