Handle Height - Snapper SPV2270HW Operator's Manual

Assembly
Adjusting the Handle Height
1. Remove the wingnuts (A, Figure4), washers (not
shown), and bolts (B) from the right and left handle
brackets (C).
Note. Do not remove the lower set of handle hardware (D).
Figure 4: Removing the handle adjustment hardware
2. Adjust the handle to a higher or lower height adjustment
hole (A, Figure 5).
3. Reinstall the bolts, washers and wingnuts removed in
Step 1.
Figure 5: Height adjustment holes
(Components removed for clarity)