Download  Print this page

Snapper S211, SP211, SPV211, SPV211S, SPV211E Safety Instructions & Operator's Manual

21” ‘easy line’ walk behind mowers
Hide thumbs

Advertisement

MODEL DESIGNATION
SELF-PROPELLED
VARIABLE SPEED
S - 'Easy Line'
P - Self-Propelled Model
Thank you for buying a SNAPPER Product! Before operating your machine, read this manual carefully and pay
Thank you for buying a SNAPPER Product! Before operating your machine, read this manual carefully and pay
particular attention to the "IMPORTANT SAFETY INSTRUCTIONS" on Pages 2 - 4. Remember that all power equip-
particular attention to the "IMPORTANT SAFETY INSTRUCTIONS" on Pages 2 - 4. Remember that all power equip-
ment can be dangerous if used improperly. Also keep in mind that SAFETY requires careful use in accordance
ment can be dangerous if used improperly. Also keep in mind that SAFETY requires careful use in accordance
with the operating instructions and common sense!
with the operating instructions and common sense!
NOTE: Specifications are correct at time of printing and are subject to change without notice.
* Actual sustained engine power will likely be lower due to operating limitations and environmental factors. Please refer to 'Engine Power
Rating Information' on Page 4 for further information.
BRIGGS & STRATTON YARD POWER PRODUCTS GROUP
COPYRIGHT © 2007, BRIGGS & STRATTON CORPORATION
MILWAUKEE, WI, USA. ALL RIGHTS RESERVED.
Safety Instructions & Operator's Manual for
Safety Instructions & Operator's Manual for
MODEL NUMBER EXPLANATION
S
P
V - Variable Speed Model
21" 'EASY LINE'
WALK BEHIND
V
21
1
21 - 21" Cutting Width
1 - Series 1
MOWERS
MODELS
S211
SP211
SPV211
SPV211S
SPV211E
E
OPTION DESIGNATION
SERIES DESIGNATION
CUTTING WIDTH
S - Swivel Front Wheels
E - Electric Start
MANUAL No. 7101295 (I.R. 1/3/2007)
TP 100-5252-IR-WB-N

Advertisement

Table of Contents
loading

  Related Manuals for Snapper S211, SP211, SPV211, SPV211S, SPV211E

  Summary of Contents for Snapper S211, SP211, SPV211, SPV211S, SPV211E

  • Page 1 V - Variable Speed Model P - Self-Propelled Model Thank you for buying a SNAPPER Product! Before operating your machine, read this manual carefully and pay Thank you for buying a SNAPPER Product! Before operating your machine, read this manual carefully and pay particular attention to the "IMPORTANT SAFETY INSTRUCTIONS"...
  • Page 2: Important Safety Instructions

    If you have any questions pertaining to your machine which your dealer cannot answer to your satisfaction, call or write the Customer Service Department at SNAPPER, McDonough, Georgia 30253. Phone: (1-800-935-2967).
  • Page 3 IMPORTANT SAFETY INSTRUCTIONS SAFE HANDLING OF GASOLINE (Continued From Previous Page) 3. DO NOT remove fuel cap or add fuel with the engine running. Allow the engine to cool before refueling. 4. DO NOT refuel the machine indoors. 5. DO NOT store the machine or fuel container inside where there is an open flame, spark or pilot light such as on a water heater or other appliances.
  • Page 4 10. DO NOT test for spark by grounding spark plug next to spark plug hole; spark plug could ignite gas exit- ing engine. 11. Have machine serviced by an authorized SNAPPER dealer at least once a year and have the dealer install any new safety devices.
  • Page 5: Table Of Contents

    TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS ........2 - 4 TABLE OF CONTENTS .
  • Page 6: Section 1 - Familiarization

    (MODEL SPV211 SHOWN) 1.2 NOMENCLATURE The nomenclature drawing above, Figure 1.1, shows the essential parts of the SNAPPER ‘EASY LINE’ WALK BEHIND MOWERS. It is recommended that all opera- tors of the mower become thoroughly familiar with the controls, parts and operation of the mower before oper- ating.
  • Page 7: Section 2 - Operating Instructions

    Section 2 - OPERATING INSTRUCTIONS 2.1 PRE-START CHECK LIST Make the following checks and perform the service required before each start-up. 2.1.1. Check guards, deflectors, grass bag, adapter and covers to make sure all are in place and securely tightened. 2.1.2.
  • Page 8: Propelling Mower

    Section 2 - OPERATING INSTRUCTIONS 2.2 STARTING & OPERATION 2.2.2. PROPELLING MOWER (Self Propelled Models Only) 1. Start engine. Refer to Section “Starting & Operation – Engine & Blade”. 2. Move ground speed control to the desired speed position. See Figure 2.6. 3.
  • Page 9: Cutting Height Adjustment

    Section 2 - OPERATING INSTRUCTIONS WARNING DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and compo- nents are HOT. Avoid serious burns, allow suffi- cient time for all components to cool.
  • Page 10: Installation Of Side Discharge Deflector

    Inspect frequently and replace worn or damaged compo- nents immediately. Grass Catcher bags used on SNAPPER products are made of woven fabric, and are subject to dete- rioration and wear during normal usage. Check condition of bag before each use.
  • Page 11: Section 3 - Maintenance Instructions

    Section 3 - MAINTENANCE 3.1 INTRODUCTION To retain the quality of the mower, use genuine SNAP- PER replacement parts only. Contact a local SNAP- PER dealer for parts and service assistance. For the correct part or information for a particular mower, always mention model and serial number.
  • Page 12: Wheel Drive Components

    Section 3 - MAINTENANCE WARNING DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool.
  • Page 13: Section 4 - Adjustments And Repair

    Section 4 - REPAIR & ADJUSTMENTS WARNING DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool.
  • Page 14: Wheel Drive Control Adjustment

    Section 4 - REPAIR & ADJUSTMENTS WARNING DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool.
  • Page 15: Ground Speed Control Adjustment

    Section 4 - REPAIR & ADJUSTMENTS WARNING DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool.
  • Page 16: Belt Service

    Section 4 - REPAIR & ADJUSTMENTS WARNING DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool.
  • Page 17: Battery Service

    Section 4 - REPAIR & ADJUSTMENTS WARNING DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool.
  • Page 18: Rear Cover Removal & Installation

    Section 4 - REPAIR & ADJUSTMENTS WARNING DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool.
  • Page 19: Troubleshooting

    3. Replace air lifts. Tighten to proper torque. 4. Replace belt. 1. Clean debris. 2. Adjust transmission clutch cable. 3. Replace drive belt. 4. Contact authorized SNAPPER dealer. 1. Adjust transmission clutch cable. 2. Contact authorized SNAPPER dealer. 1. Clean debris. 2. Adjust ground speed control.
  • Page 20: Service Schedule

    Section 3 - OPERATING INSTRUCTIONS SERVICE SCHEDULE ITEM SERVICE PERFORMED Engine Oil Check Oil Level Initial Oil Change Periodic Oil Change Air Pre-Cleaner Clean Sponge Element Engine Manual Air Cleaner Clean or Replace Spark Plug Replace Engine Cooling Clean Shroud & Fins System Drive Belt Check for Wear and...
  • Page 21: Warranty

    For two (2) years from purchase date for the original purchaser’s residential, non-commercial use, SNAPPER, through any authorized SNAPPER dealer will replace, free of charge (except for taxes where applicable), any part or parts found upon examination by the factory at McDonough, Georgia, to be defective in material or workmanship or both.
  • Page 22: Primary Maintenance

    PRIMARY MAINTENANCE...
  • Page 23 PRIMARY MAINTENANCE...
  • Page 24 PRIMARY MAINTENANCE...
  • Page 25 PRIMARY MAINTENANCE...
  • Page 26: Product Registration Form

    Date of Purchase_______________________________________________________ Retailer ______________________________________________________________ Retailer's Phone Number _______________________________________________ It is very important that you register your purchase with Snapper to ensure war- ranty coverage. Please mail your product registration card to: Snapper at P.O. Box 777, McDonough, Georgia 30253.
  • Page 27 NOTES...
  • Page 28: Walk Behind Mowers

    WALK BEHIND MOWERS Snapper products are built using engines that meet or exceed all applicable emissions requirements on the date manufactured. The labels on those engines contain very important emissions information and critical safety warnings. Read, Understand, and Follow all warnings and instructions in this manual, the engine manual, and on the machine, engine and attachments.