Snapper S21, SP21, SPV21, SPV21S, SPV21E Safety Instructions & Operator's Manual
  1. Manuals
  2. Brands
  3. Snapper Manuals
  4. Lawn Mower
  5. S21, SP21, SPV21, SPV21S, SPV2
  6. Safety instructions & operator's manual

Snapper S21, SP21, SPV21, SPV21S, SPV21E Safety Instructions & Operator's Manual

21” ‘easy line’ walk behind mowers
Hide thumbs
Table of Contents

Advertisement

Quick Links

MODEL DESIGNATION
SELF-PROPELLED
VARIABLE SPEED
S – 'Easy Line'
P – Self Propelled Model
Thank you for buying a SNAPPER Product! Before operating your Walk Behind, read this manual carefully and
pay particular attention to the "IMPORTANT SAFETY INSTRUCTIONS" on Pages 2 - 4. Remember that all power
equipment can be dangerous if used improperly. Also keep in mind that SAFETY requires careful use in
accordance with the operating instructions and common sense.
NOTE: Specifications are correct at time of printing and are subject to change without notice.
* Actual sustained equipment horsepower will likely be lower due to operating limitations and environmental factors.
COPYRIGHT © 2006
SNAPPER – A DIVISION OF SIMPLICITY MFG., INC.
ALL RIGHTS RESERVED
Safety Instructions & Operator's Manual for
MODEL NUMBER EXPLANATION
S
V – Variable Speed Model
21" 'EASY LINE'
WALK BEHIND
P
V
21
21 – 21" Cutting Width
MOWERS
MODELS
SPV21S
SPV21E
E
OPTION DESIGNATION
S – Swivel Front Wheels
E – Electric Start
MANUAL No. 7100490 (Rev. 1, 1/20/2006)
TP 100-5117-01-WB-N
S21
SP21
SPV21
CUTTING WIDTH

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the S21, SP21, SPV21, SPV21S, SPV21E and is the answer not in the manual?

Questions and answers

Related Manuals for Snapper S21, SP21, SPV21, SPV21S, SPV21E

Summary of Contents for Snapper S21, SP21, SPV21, SPV21S, SPV21E

  • Page 1 P – Self Propelled Model E – Electric Start Thank you for buying a SNAPPER Product! Before operating your Walk Behind, read this manual carefully and pay particular attention to the “IMPORTANT SAFETY INSTRUCTIONS” on Pages 2 - 4. Remember that all power equipment can be dangerous if used improperly.

  • Page 2: Important Safety Instructions

    If you have any questions pertaining to your machine which your dealer cannot answer to your satisfaction, call or write the Customer Service Department at SNAPPER, McDonough, Georgia 30253. Phone: (1-800-935-2967).

  • Page 3: Safe Handling Of Gasoline

    IMPORTANT SAFETY INSTRUCTIONS SAFE HANDLING OF GASOLINE OPERATION (Continued From Previous Page) (Continued From Previous Column) 3. DO NOT remove fuel cap or add fuel with the engine 11. Before cleaning, repairing or inspecting make running. Allow the engine to cool before refueling. certain engine, blade and all moving parts have 4.
  • Page 4 10. DO NOT test for spark by grounding spark plug next to spark plug hole; spark plug could ignite gas exiting engine. 11. Have machine serviced by an authorized SNAPPER dealer at least once a year and have the dealer install any new safety devices.

  • Page 5: Table Of Contents

    TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS..............2 - 4 TABLE OF CONTENTS......................5 SECTION 1 - FAMILIARIZATION..................6 SECTION 2 - OPERATING INSTRUCTIONS............... 7-10 Pre-start Checklist....................7 Starting & Stopping Engine & Blades ..............7 Propelling Mower ....................8 Handle Height Adjustment ..................8 Cutting Height Adjustment..................9 Recycling Operation.....................9 Installation of Side Discharge Deflector ............10 Installation of Grass Bag Adapter ..............10...

  • Page 6: Section 1 - Familiarization

    SNAPPER ‘EASY LINE’ WALK BEHIND the essential parts of the SNAPPER ‘EASY LINE’ MOWERS. Its purpose, aside from recommending WALK BEHIND MOWERS. It is recommended that operating and routine service requirements, is to all operators of the mower become thoroughly...

  • Page 7: Section 2 - Operating Instructions

    Section 2 - OPERATING INSTRUCTIONS 2.1 PRE-START CHECK LIST 2.2 STARTING & OPERATION Make the following checks and perform the service 2.2.1. ENGINE & BLADE required before each start-up. 1. Push primer button three times to start a cold 2.1.1. Check guards, deflectors, grass bag, adapter engine.

  • Page 8: Propelling Mower

    Section 2 - OPERATING INSTRUCTIONS 2.2 STARTING & OPERATION 2. Move swivel caster lock lever, located on left 2.2.2. PROPELLING MOWER side of handle assembly, to ‘LOCK’ position to lock (Self Propelled Models Only) clip down over caster stud. See Figure 2.8. 1.

  • Page 9: Cutting Height Adjustment

    Section 2 - OPERATING INSTRUCTIONS WARNING EACH NOTCH RAISES CUT 0.5” DO NOT attempt any maintenance, adjustments or LATCH service with engine and blade running. STOP POSITIONS engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine 4.2”...

  • Page 10: Section 2 - Operating Instructions

    Install Grass Catcher bags used on SNAPPER products are internal/external tooth lock washers and knob nuts onto made woven fabric, subject studs and tighten securely. See Figure 2.14.

  • Page 11: Section 3 - Maintenance

    1. Disconnect spark plug wire and secure end away To retain the quality of the mower, use genuine from plug. SNAPPER replacement parts only. Contact a local 2. Tilt mower up on its rear wheels for access to the SNAPPER dealer for parts and service assistance.

  • Page 12: Wheel Drive Components

    Section 3 – MAINTENANCE 7. Carefully fold the handles, “flexing” the control WARNING cables to prevent cable damage. 8. Store the mower in a shed or other dry area, DO NOT attempt any maintenance, adjustments or protected from weather. service with engine and blade running. STOP engine and blade.

  • Page 13: Section 4 - Repair & Adjustments

    Section 4 - REPAIR & ADJUSTMENTS WARNING MAKE SURE THAT BLADE HUB IS DO NOT attempt any maintenance, adjustments or SEATED service with engine and blade running. STOP engine BETWEEN BLADE and blade. Disconnect spark plug wire and secure FLANGES away from spark plug.

  • Page 14: Wheel Drive Control Adjustment

    Section 4 - REPAIR & ADJUSTMENTS 3. Engage lever, and roll mower back and forth WARNING several times to ensure clutch dogs are fully DO NOT attempt any maintenance, adjustments or engaged. With lever engaged, measure length of service with engine and blade running. STOP extended spring.

  • Page 15: Ground Speed Control Adjustment

    Section 4 - REPAIR & ADJUSTMENTS To adjust idler spring tension: WARNING Loosen outer nut on end of ground speed cable, DO NOT attempt any maintenance, adjustments or and run inner nut in toward cable (clockwise) or out service with engine and blade running. STOP engine from cable (counterclockwise)

  • Page 16: Belt Service

    Section 4 - REPAIR & ADJUSTMENTS 4. SINGLE SPEED MODELS WARNING a. Loosen (do not remove) engine mounting bolts DO NOT attempt any maintenance, adjustments or securing belt guides, and swing belt guides out away service with engine and blade running. STOP engine from engine pulley.

  • Page 17: Battery Service

    Section 4 - REPAIR & ADJUSTMENTS 4.5.4. BATTERY TESTING WARNING Check the battery’s state of charge using a voltmeter. Remember to hook the positive lead to DO NOT attempt any maintenance, adjustments or the battery’s positive terminal, and the negative lead service with engine and blade running.

  • Page 18: Rear Cover Removal & Installation

    Section 4 - REPAIR & ADJUSTMENTS WARNING DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool.

  • Page 19: Troubleshooting

    2. Adjust transmission clutch cable. 3. Drive belt requires replacement. 3. Replace drive belt. 4. Damaged transmission. 4. Contact authorized SNAPPER dealer. Transmission Noise 1. Transmission clutch cable adjustment required. 1. Adjust transmission clutch cable. (Self-Propelled Models) 2. Damaged transmission.

  • Page 20: Service Schedule

    SERVICE SCHEDULE ITEM SERVICE PERFORMED REF. EACH EACH SEASON Check Oil Level Page 7 Engine Oil Initial Oil Change Page 11 Periodic Oil Change Page 11 Air Pre-Cleaner Clean Sponge Element Engine Manual Air Cleaner Clean or Replace Engine Manual Replace Engine Manual Spark Plug...

  • Page 21: Warranty

    For two (2) years from purchase date for the original purchaser's residential, non-commercial use, SNAPPER, through any authorized SNAPPER dealer will replace, free of charge (except for taxes where applicable), any part or parts found upon examination by the factory at McDonough, Georgia, to be defective in material or workmanship or both.

  • Page 22: Primary Maintenance

    PRIMARY MAINTENANCE...
  • Page 23 PRIMARY MAINTENANCE...
  • Page 24 PRIMARY MAINTENANCE...
  • Page 25 PRIMARY MAINTENANCE...

  • Page 26: Product Registration Form

    Date of Purchase ___________________________________________________________ Retailer____________________________________________________________________ Retailer’s Phone Number ____________________________________________________ It is very important that you register your purchase with Snapper to ensure warranty coverage. Please mail your product registration card to: Snapper at P.O. Box 777, McDonough, Georgia 30253. Or you may register on line at www.snapper.com.
  • Page 27 NOTES...

  • Page 28: Walk Behind Mowers

    MOWERS IMPORTANT Snapper products are built using engines that meet or exceed all applicable emissions requirements on the date manufactured. The labels on those engines contain very important emissions information and critical safety warnings. Read, Understand, and Follow all warnings and instructions in this manual, the engine manual, and on the machine, engine and attachments.

This manual is also suitable for:

S21Sp21Spv21Spv21sSpv21e

Table of Contents