Cleaning The Paper Presser - Epson SpectroProofer Mounter 17 User Manual

SpectroProofer Mounter 17"
D
Remove the white calibration tile from the white
calibration tile holder.
E
Use a soft, dry cloth to carefully remove any dust
or dirt from the surface of the white calibration
tile or the surface of the backing.
If the dirt does not come off, soak a soft cloth in
water and wring it dry, and then rub away any
dirt from the surface. Then, wipe the surface
again with a soft, dry cloth.
F
See the SpectroProofer Mounter 17" Setup Guide
to setup the mounter.
U See the SpectroProofer Mounter 17" Setup
Guide
User's Guide
Maintenance
15
Cleaning the paper
presser
A
Turn off the printer, and then open the front
cover of the mounter.
B
Hold both ends of the paper presser and lower it
forward.
C
Soak a soft cloth in water with a small amount of
mild detergent, wring it dry, and then wipe away
dirt from the base (the surface that touches the
paper) of the paper presser.
Then, wipe it with a soft, dry cloth.