Cleaning The Paper Guide Unit - Epson SpectroProofer Mounter 17 User Manual

SpectroProofer Mounter 17"
D
Close the front cover of the mounter.
Cleaning the paper guide
unit
Some powdery paper accumulates in the paper guide
unit when the printer cuts paper using the auto cutter.
Use the following procedure to periodically clean up the
powdery paper (about once a month).
A
Open the side cover, and then unplug the printer
connection cable.
B
Remove the mounter.
User's Guide
Maintenance
16
C
Remove the paper guide unit, and then wipe
away the powdery paper.
D
Replace the paper guide unit, install the mounter,
and then connect the printer connection cable.
U See the SpectroProofer Mounter 17" Setup
Guide