Preparing And Executing A Color Measurement Job - Epson SpectroProofer Mounter 17 User Manual

SpectroProofer Mounter 17"
D
Follow the on-screen instructions to perform
color calibration.
Click the Help button to see the online help for detailed
information.
Preparing and executing a color
measurement job
This section introduces the color measuring procedures
using Preparing and executing a color measurement
job.
See the online help for detailed information.
A
Turn on the printer, and then load the paper.
See the printer manual when loading the paper.
U See "Supported Media" on page 9
B
Start the SpectroProofer Utilities.
U See "Starting SpectroProofer Utilities" on
page 11
User's Guide
How To Use
12
C
Click Preparing and executing a color
measurement job.
D
Select the job you want to perform.
Follow the on-screen instructions to complete
the settings.
Click the Help button to see the online help for
detailed information.
Note:
The ICC profile cannot be created by the
SpectroProofer Utilities alone. You need
commercially available profile creation software
separately.