Handling Instructions; Color Measurement Device (Ils20Ep/Ils20Epuv); Backing; Mounter - Epson SpectroProofer Mounter 17 User Manual

SpectroProofer Mounter 17"

Handling Instructions

Color Measurement Device
(ILS20EP/ILS20EPUV)
❏ Do not touch the lens directly or place the lens face
down.
If a scratch, dirt or other matter gets on the lens, it
may affect the color measuring result.
❏ Do not touch the white surface of the white
calibration tile.
If a scratch, dirt or other matter gets on the surface,
it may affect the color measuring result.
Caution:
c
Do not break or lose the white calibration tile. You
cannot buy the white calibration tile by itself. You
need to purchase ILS20EP/ILS20EPUV set.

Backing

Take care to prevent a scratch or dirt getting on the
surface of the backing.
If a scratch, dirt or other matter gets on the backing, it
may affect the color measuring result.
Caution:
c
Do not drop or knock it against hard objects because
the backing is a fragile part.
User's Guide
Introduction
7

Mounter

Do not touch the following parts during operation.
Unnecessary touching the inside of the mounter may
damage the product.