Advertisement
Assembly
requires
two persons.
Place all parts of the elliptical exerciser in a cleared area and remove the
packing materials. Do not dispose of the packing materials until assembly is completed. In addition
to the
included allen wrenches,
assembly
requires
a phitlips
screwdriver
_-I_,
two adjustable
wrenches
_
a rubber mallet
......
_,
and p{iers
,
c
q /,
As you assemble the elliptical exerciser, use the drawings below to identify the small parts used for assembly.
The number in parenthesis below each drawing is the key number of the part, from the PART LiST on pages 24
and 25. The number following the key number is the quantity used for assembly. Note: Some smatl parts may
have been pre-assembled.
If a part is not in the parts bag, check to see if it has been pre-assembled.
M6 Washer
M8 Split
M8 Washer
MI0 Split
M8 Jam Nut
MI0 Nylon
(102)-2
Washer (122)=4
(132)-4
Washer (118)-3
(91)-6
Locknut (90)-2
M4 x 25mm Round
M6 x 16mm Button
Head Screw (115)-2
Screw (103)-4
M8 x 52mm Button
Bolt (100)-4
M10 x 25mm Button
Screw (123)-3
M4 x 16mm Round
Head Screw (125)-1
M4 x 16mm
Screw (99)-4
Bolt Set (101 )-2
M8 x 42mm Button
Bolt (116)-4
M8 x 35mm Button
Bolt (117)-2
1. identify the Front Stabilizer (29), which has Wheels (44)
attached to the front. While another person lifts the
front of the Frame (1), attach the Front Stabilizer to the
Frame with two MI0 x 92mm Carriage Bolts (124) and
two M10 Nylon Locknuts (90).
124
44
/
\
29
9O
Advertisement
