Table of Contents
Advertisement
11
Technical
Specifications
58
Printing Method:
Printing Resolution:
Colors:
Print Speed:
Printing Area:
Accepted Card Width:
Accepted Card Length:
Accepted Card Thickness:
Card Types:
Card Capacity:
Software Driver:
Interface:
Operating Temperature:
Humidity:
Dimensions:
Weight:
Agency Listings:
Supply Voltage:
Supply Frequency:
Options:
Dye-sublimation/resin thermal transfer
300 dpi (11.8 dots/mm)
Up to 16.7 million
Approximately 8 seconds (K)
Approximately 15 seconds (KO)
Approximately 30 seconds (YMCKO)
Additional 45 seconds required if applying PolyGuard
overlaminate
Standard CR-80 Card:
Card Size
2.13Ó (54mm) x 3.38Ó (86mm)
Print Area
1.93Ó (49mm) x 3.1Ó (80.5mm)
Oversize Card:
Card Size
2.36Ó (60mm) x 3.62Ó (92mm)
Print Area
2.24Ó (57mm) x 3.5Ó (88mm)
2.1Ó to 2.63Ó W (53mm to 67mmW)
3.25Ó to 3.88Ó L (82mm to 98mmL)
.01Ó to .04Ó (.254mm to 1.02mm);
PVC or Polyester cards with polished PVC finish;
monochrome resin ribbon required for straight polyester
cards
Accepts up to 100 standard CR-80 PVC Cards; auto or
manual feed
Windows driver included for IBM-PCÕs and compatibles
Standard 8-bit Centronics-type parallel (ECP compatible)
65¼F to 80¼F (18¼C to 27¼C)
Non-condensing 20%Ð60%
10.44Ó H x 24.79Ó W x 10.94Ó D
(265mmH x 630mmW x 278mmD)
42 lbs. (19 kg)
Safety standards: UL 1950, CSA C2.2 and T†V-GS
(IEC-950); Emissions standards: FCC Class A,
CRC c1374, Class A and T†V-EMC (IEC-801 -2, -3, -4;
CISPR 22, Class B) CE
110-120 or 220-240 VAC
50 Hz/60 Hz
¥ Magnetic Stripe Encoding Module, High and low
coercivity, Tracks 1, 2, and 3
¥ CardMaker for Windows software
Advertisement
Table of Contents
