Adaptive Cli Editor - Dell OpenManage Network Manager Client Manual

Adaptive CLI Editor

This editor creates new Adaptive CLIs When you click New, or Edit after, selecting an existing
command, the command editor screen opens. You can create Configure Commands, External
Commands, and Show Commands.
The editor screen has the following tabs (the ones that appear depend on the type of command you
are editing):
• General
• Attributes
• Scripts
NOTE:
The Adaptive CLI Manager logs into devices in enable mode by default. For most configuration
commands (and even some show commands), you must typically first set the device to its configuration
mode.
Dell OpenManage Network Manager validates entries. If saving fails, a red "X" appears next to required
omitted entries.
Click Save to preserve the Adaptive CLI you have configured. Clicking Close does not save your
configuration.
348
Actions Portlet | Actions and Adaptive CLI
Tip