Dell OpenManage Network Manager Client Manual page 160

Notice that the Inspection Status fields at the bottom of the screen indicate the success or
failure of Ping, Hostname resolution, and Authentications, and the Status column displays
whether a valid authentication exists, whether it has been tested, and whether the test is
successful.
When authentications are unsuccessful, click the icons to their right to remove or edit them.
You can also click the wrench / screwdriver "fix it" icon in the Discover column to open an
editor where you can revise the authentications for that device.
Clicking Create New lets you create new authentications, Choose Existing lets you select
from existing authentications, Test Device lets you try out the authentications you have
selected, and Close closes this screen. Notice that you can configure new or existing
authentications' port, retry and timeout settings before you click Apply (or Cancel) in the
authentication editor that appears after clicking the "Fix it" button.
Save—Click Save to preserve the profile. You can then right-click it to select Execute . If you
7
select Execute from the profile editor, Dell OpenManage Network Manager does not save the
profile to execute later.
160
Discovery Profiles | Resource Management