Dell OpenManage Network Manager Client Manual page 127

Entity Type: Interface, Logical interface
Attribute
Custom 1
Custom 2
Custom 3
Custom 4
Encapsulation
IfIndex
Interface Description
Interface Number
Interface Type
MTU
Name
Notes
Port Number
Slot Number
Subnet Mask
Best practice is to clarify such attributes by combining them with others that spell out their source.
Description
Note that although you
can re-name any Custom
attribute, you must use
the variable's original
name. For example here,
that is
{RedCell.Config.Equipm
entManager_Custom1}
Encapsulation
SNMP Interface Index
Description of the
Interface
Interface Number
Common Interface Type
Maximum Transmission
Unit
Interface name
Interface Notes
Port Number
Slot Number
Subnet Mask of the
Interface
Redcell Email Action variable
{RedCell.Config.Interface_Custom1}
{RedCell.Config.Interface_Custom2}
{RedCell.Config.Interface_Custom3}
{RedCell.Config.Interface_Custom4}
{RedCell.Config.Interface_Encapsulation}
{RedCell.Config.Interface_IfIndex}
{RedCell.Config.Interface_DeviceDescripti
on}
{RedCell.Config.Interface_InterfaceNumbe
r}
{RedCell.Config.Interface_CommonType}
{RedCell.Config.Interface_Mtu}
{RedCell.Config.Interface_Name}
{RedCell.Config.Interface_Notes}
{RedCell.Config.Interface_PortNumber}
{RedCell.Config.Interface_SlotNumber}
{RedCell.Config.Interface_SubMask}
Event Processing Rules | Key Portlets
127