Dell OpenManage Network Manager Client Manual page 218

Circular
Circular layouts arrange all nodes in a circle.
Minimal circle radius – Use the slider to determine the radius of
the circle.
Minimal nodes spacing– Use the slider to determine the nodes
spacing.
Wedge Angle –Use the slider to determine the arc where child
nodes appear.
Overlap avoidance method–Select Approximate or Deterministic.
Root node selection policy–Select Most weighted (for general graphs), Manual (for general
graphs) or Directed (only for tree graphs).
Link drawing type– Select from Straight, Straight polyline, Curved polyline, Orthogonal polyline,
Orthogonal curved.
Cluster Policy–Select Vertical or Horizontal. This determines the (automated) orientation of the
topology. Remember, you can click and drag device icons.
Cluster Spacing—Use the slider to determine the spacing between icons not in child / parent
hierarchy.
Hierarchical-Cyclic
This arranges connections in a hierarchy. Use the
following settings to alter its appearance.
Distance between levels– Use the slider to determine
the distance between levels.
Distance between nodes– Use the slider to determine
the distance between nodes.
Orientation– Select from Top to Bottom, Bottom to Top, Left to Right or Right to Left.
Draw edges from –Select from Node Center or Node Side.
Link drawing type –Select from Straight, Straight polyline, Curved polyline, Orthogonal polyline
or Orthogonal curved.
Cluster Policy –Select from Horizontal or Vertical.
Cluster Spacing—Use the slider to determine the spacing between icons not in child / parent
hierarchy.
218
| Visualize My Network