Daylight Saving Time - TP-Link TL-SG2452 User Manual

Note:
The system time will be restored to the default when the switch is restarted and you need
reconfigure the system time of the switch.

4.1.4 Daylight Saving Time

Here you can configure the Daylight Saving Time of the switch.
Choose the menu System→System Info→Daylight Saving Time to load the following page.
The following entries are displayed on this screen:
DST Config

DST Status:
Predefined Mode:
Recurring Mode:
Figure 4-6 Daylight Saving Time
Enable or disable the DST.
Select a predefined DST configuration.
USA: First Sunday in April, 02:00 ~ Last Sunday in October,

02:00.
Australia: First Sunday in October, 02:00 ~ First Sunday in

April, 03:00.
European: Last Sunday in March, 01:00 ~ Last Sunday in

October, 01:00.
New Zealand: First Sunday in October, 02:00 ~ Last Sunday

in March, 03:00.
Specify the DST configuration in recurring mode. This
configuration is recurring in use.
Offset: Specify the time adding in minutes when Daylight

Saving Time comes.
Start/End Time: Select starting time and ending time of

Daylight Saving Time.
12