Application Example For 802.1Q Vlan - TP-Link TL-SG2452 User Manual

Configuration Procedure:
Step Operation
1 Set the link type for
port.
2 Create VLAN.
3 Modify/View VLAN.
4 Delete VLAN

6.2 Application Example for 802.1Q VLAN

Network Requirements

Switch A is connecting to PC A and Server B;

Switch B is connecting to PC B and Server A;

PC A and Server A is in the same VLAN;

PC B and Server B is in the same VLAN;

PCs in the two VLANs cannot communicate with each other.

Network Diagram

Description
Required. On the VLAN→802.1Q VLAN→Port Config page, set
the link type for the port based on its connected device.
Required. On the VLAN→802.1Q VLAN→VLAN Config page,
click the Create button to create a VLAN. Enter the VLAN ID and
the description for the VLAN. Meanwhile, specify its member
ports.
Optional. On the VLAN→802.1Q VLAN→VLAN Config page,
click the Edit/Detail button to modify/view the information of the
corresponding VLAN.
Optional. On the VLAN→802.1Q VLAN→VLAN Config page,
select the desired entry to delete the corresponding VLAN by
clicking the Delete button.
46