Port Info
Port:
Type:
Rate:
Status:
Click a port to display the bandwidth utilization on this port. The actual rate divided by theoretical
maximum rate is the bandwidth utilization. The following figure displays the bandwidth utilization
monitored every four seconds. Monitoring the bandwidth utilization on each port facilitates you to
monitor the network traffic and analyze the network abnormities.
Bandwidth Utilization
Rx:
Tx:
4.1.2 Device Description
On this page you can configure the description of the switch, including device name, device location
and system contact.
Choose the menu System→System Info→Device Description to load the following page.
Figure 4-2 Port Information
Displays the port number of the switch.
Displays the type of the port.
Displays the maximum transmission rate of the port.
Displays the connection status of the port.
Figure 4-3 Bandwidth Utilization
Select Rx to display the bandwidth utilization of receiving packets
on this port.
Select Tx to display the bandwidth utilization of sending packets
on this port.
10