TP-Link TL-SG2452 User Manual page 10

Chapter
Chapter 4 System
Chapter 5 Switching
Chapter 6 VLAN
Chapter 7 Spanning Tree
Chapter 8 Multicast
Chapter 9 QoS
Introduction
This module is used to configure system properties of the switch.
Here mainly introduces:
System Info: Configure the description, system time and network

parameters of the switch.
User Management: Configure the user name and password for

users to log on to the Web management page with a certain
access level.
System Tools: Manage the configuration file of the switch.

Access Security: Provide different security measures for the

login to enhance the configuration management security.
This module is used to configure basic functions of the switch. Here
mainly introduces:
Port: Configure the basic features for the port.

LAG: Configure Link Aggregation Group. LAG is to combine a

number of ports together to make a single high-bandwidth data
path.
Traffic Monitor: Monitor the traffic of each port

MAC Address: Configure the address table of the switch.

This module is used to configure VLANs to control broadcast in
LANs. Here mainly introduces:
802.1Q VLAN: Configure port-based VLAN.

This module is used to configure spanning tree function of the
switch. Here mainly introduces:
STP Config: Configure and view the global settings of spanning

tree function.
Port Config: Configure CIST parameters of ports.

MSTP Instance: Configure MSTP instances.

STP Security: Configure protection function to prevent devices

from any malicious attack against STP features.
This module is used to configure multicast function of the switch.
Here mainly introduces:
IGMP Snooping: Configure global parameters of IGMP Snooping

function, port properties, VLAN and multicast VLAN.
Multicast IP: Configure multicast IP table.

Multicast Filter: Configure multicast filter feature to restrict users

ordering multicast programs.
Packet Statistics: View the multicast data traffic on each port of

the switch, which facilitates you to monitor the IGMP messages
in the network.
This module is used to configure QoS function to provide different
quality of service
requirements. Here mainly introduces:
DiffServ: Configure priorities, port priority, 802.1P priority and

DSCP priority.
Bandwidth Control: Configure rate limit feature to control the

traffic rate on each port; configure storm control feature to filter
broadcast, multicast and UL frame in the network.
3
for various network applications and