Stand-Up Models - Dell Brocade Adapters Installation And Reference Manual

Using Brocade HBAs, you can connect your host system to devices on the Fibre Channel SAN. The
combined high performance and proven reliability of a single-ASIC design makes these HBAs ideal
for connecting hosts to SAN fabrics based on Brocade Fabric or M-Enterprise operating systems.
NOTE
This publication only supports the HBA models listed in
about the Brocade 410 and 420 Fibre Channel HBAs, also known as the Brocade 400 Fibre Channel
HBAs.

Stand-up models

Figure 6
note that the following illustration is representative and may have minor physical differences from
the HBA that you purchased.
1
2
3
4
5
6
7
8
FIGURE 6
Brocade Adapters Installation and Reference Manual
53-1002144-01
on page 13 illustrates major components of the Brocade 825 stand-up model HBA. Please
LEDs for port 1 SFP
Fiber optic cable connectors for port 1 and port 0 SFPs
LEDs for port 0 SFP
Low-profile mounting bracket. Note: The HBA ships with the low-profile mounting bracket installed.
PCIe x8 PCIe connector
ASIC
Serial number label
Label showing PWWN for each port.
825 HBA with low-profile mounting bracket (head sink removed)
Host bus adapters
Table 5, and does not provide information
1
13