Dell Brocade Adapters Installation And Reference Manual page 180

4
Boot over SAN
Installing Linux RHEL 4.x or 5.x and the driver
Use the following steps to install RHEL and the adapter driver on an unformatted disk that you
configured as a bootable device when setting up the adapter BIOS or UEFI on the host system.
If the LUN you have targeted for booting the host system already has an operating system installed,
be sure to use options for reformatting the LUN during Linux installation. Refer to your operating
system documentation for details.
NOTE
The following procedures load the operating system, adapter driver, and utilities to the designated
boot LUN to allow adapter operation and booting your host system from the LUN. However, the HCM
Agent and full range of Brocade Command Line Utilities, such as bfa_supportsave, are not installed.
To install the complete driver package with HCM Agent and full-range of utilities refer to
the full driver package on boot LUNs"
1. Refer to
2. Download the appropriate RHEL adapter driver update disk (dud) .iso file for your host platform
3. Create a driver update disk CD or USB drive from the ISO image.
4. Insert the Linux Red Hat product CD #1 into the host system's CD drive and boot the system.
5. At the boot prompt enter one of the following commands and press Enter:
152
"Boot installation packages"
operating systems that support these files. Also refer to
page 40 for information on operating system support for adapter drivers.
NOTE
For RHEL 5 x86 and x86_64 systems, install the fc DUD files for CNAs and Fabric Adapter ports
configured in CNA mode and for HBAs and Fabric Adapter ports configured in HBA mode. The
fc dud file format is brocade_fc_adapter_<operating system>_<platform>_dud_<version>.iso.
from the Brocade adapters website using the following steps:
a. Go to the adapters website at www.brocade.com/adapters.
b. Navigate to the adapters Downloads page.
c. Select your operating system from the Downloads list to display appropriate download
files.
d. Download the dud from the "Driver Update Disks (DUDs)" area.
•
For booting over SAN, use the following command.
linux dd
•
For booting over SAN with multi path, use the following command.
linux dd mpath
NOTE
The mpath option installs the operating system and driver to a LUN connected to the server
through multiple paths and provides a unique and single name for the device. If the mpath
option were not used in a multi-path configuration, a separate device instance would display
for each path during installation. By using the option, only one instance displays for the device,
although multiple paths still exist.
on page 162 after completing the following steps.
on page 49 for a list of driver update disk files and the
"Operating system support"
Brocade Adapters Installation and Reference Manual
"Installing
on
53-1002144-01