Mezzanine Adapters - Dell Brocade Adapters Installation And Reference Manual

1
Converged network adapters

Mezzanine adapters

Mezzanine adapters are smaller modules than stand-up models. These mount on server blades
that install in blade system enclosures.
1007
Figure 4
horizontal (CFFh) CNA containing two ports operating at 10 Gbps. Please note that the following
illustration is representative and may have minor physical differences from the card that you
purchased.
1
2
3
4
5
6
FIGURE 4
NOTE
Labels showing the part number, PWWNs, port MAC addresses, model number, and serial number
for the Brocade 1007 CNA are on the reverse (top) side of the card.
8
illustrates major components of the Brocade 1007, which is an IBM combo form factor
ASIC with heat sink
x8 PCIe interface connector.
Release lever. Pull to release adapter from blade server.
Holes for guiding card onto blade server system board mounting posts.
Holes for guiding card onto blade server system board mounting posts.
Midplane connectors
Brocade 1007 CNA
Brocade Adapters Installation and Reference Manual
53-1002144-01