Hardware Specifications - Dell Brocade Adapters Installation And Reference Manual

5
Host Bus Adapters
•
•
•
•
PCI system values
All Brocade HBAs share a common PCI Vendor ID (VID) value to allow drivers and BIOS to recognize
them as supported Fibre Channel products. HBAs are also assigned PCI subsystem vendor IDs
(SVIDs) and subsystem IDs (SSIDs) to allow drivers and BIOS to distinguish between individual host
adapter variants. You can locate PCI device, vendor, and subsystem IDs for the installed Fibre
Channel HBA through your host's operating system tools. For example, if using Windows, use the
following steps.
1. Access the Device Manager
2. Open the Properties dialog box for the HBA by right-clicking the HBA and selecting Properties
3. Select the Details and Driver tabs to locate specific values.

Hardware specifications

The Fibre Channel interface supports features outlined in
TABLE 26
Feature
Port Speeds
SFP transceivers
(stand-up adapters)
188
Supports PCI Express specifications Gen2 (PCI Base Specification 2.0) and Gen1 (PCI Base
Specification 1.0, 1.1a, and 1.1).
Operates as an x8 lane DMA bus master at 2.5 GHz, full duplex.
Effective data rate on Gen2 systems is 32 Gbps and on Gen1 systems is 16 Gbps.
On-board flash memory provides BIOS support over the PCI bus.
from the shortcut menu.
Supported Fibre Channel features
Description
Brocade 804:
Internal ports allow user-selectable or
auto-negotiated speeds of 8, 4, 2, or 1 Gbps
per port.
Brocade 825 and 815:
•
An installed 8 Gbps SFP+ allows
user-selectable or auto-negotiated speeds of
8, 4, or 2 Gbps per port.
•
An installed 4 Gbps SFP allows
user-selectable or auto-negotiated speeds of
4, 2, or 1 Gbps per port.
Brocade 425 and 415:
•
An installed 4 Gbps SFP allows
user-selectable or auto-negotiated speeds of
4, 2, or 1 Gbps per port.
•
An installed 8 Gbps SFP+ allows
user-selectable or auto-negotiated speeds of
4 or 2 Gbps per port.
NOTE: 8 Gbps adapters support 1 Gbps at the
Multimode small form factor pluggable (SFP)
driver level, but not in a BIOS or boot over
SAN configuration.
Brocade Adapters Installation and Reference Manual
Table 26.
53-1002144-01