Table of Contents
Advertisement
Menu/ System Setup-Advance
1.
Press MENU button of remote control or projector to turn on the OSD.
2.
Press
button to System Setup-Advance category
3.
Press
button to select the beneath function for your needs
4.
Press the
button key to adjust the modes or values
5.
Press Enter key to confirm the selection
6.
Press MENU button to leave the menu or press ▲ button to back to menu category after Enter key
confirming the selection.
Feature
High Altitude Mode
Volume
Mute
Menu Position
Lamp mode
Reset Lamp Timer
User Reset
Selection
ON
Set the Fan running at full speed. Default is set as OFF.
OFF
Adjust audio volume. When setting is 0, the sound is
0~20
muted automatically.
Mute the audio volume. Press "Enter" key to Enable / Disable
this function.
Center
Top - Left
Top - Right
Select the Menu displays position.
Bottom - Right
Bottom - Left
Bright
Normal
Set the lamp mode.
Eco
After replacing to a new lamp, execute this function to reset
lamp timer.
"Language" , "Projector position" and "High altitude mode" will
be remained as the mode that user originally set up. The
other setting will be reset as factory default.
22
.
Description
Drop down menu
Advertisement
Table of Contents
