Table of Contents
Advertisement
Check:
1)
Main gas line to manifoldconnection.
2)
Rotisserie (I.R. Burner) gas line connection.
3)
Bulkhead and gas supply hose connection.
4)
Bulkhead to regulator connection.
5)
Regulator to hose connection.
Z_ WARNING:
If there
is a leak at connection
(1,2,
3, 4, or 5),
retighten
the fitting
with
a wrench
and recheck
for leaks
with
soap and water
solution.
if a leak persists
after
re-tightening
the fitting,
turn
off the gas.
DO NOT OPERATE
THE GRILL.
Contact
the Customer
Service
Representative
in your
area using the contact
information
on
our web site. Log onto www.weber.com
®.
6)
Gas supply to shutoff connection.
7)
Valves to manifold connections.
Z_ WARNING:
If there
is a leak at connections
(6 or 7), turn
off the gas. DO NOT OPERATE
THE GRILL.
Contact
the
Customer
Service
Representative
in your
area using the
contact
information
on our web site.
Log onto
www.weber.com
®.
When leak checks are complete, turn gas supply off at the source and
rinse connections with water.
REINSTALL
CONTROL PANEL
Parts required: control panel, screws and burner control knobs.
Hook the top edge of the control panel onto the control panel brackets
on either side of the front of the cooking
box.
Line up screws with screw holes on both the control panel bracket and
the frame. Tighten screws.
Place corresponding
control knobs onto the valve stems.
*The grill illustrated
may have
slight differences
than the
model
purchased.
Advertisement
Table of Contents
