Modular L3 Ethernet Switch User's Guide
Figure 2- 1. Switch installed on a Desktop or Shelf
Rack Installation
The Switch can be mounted in an EIA standard size, 19-inch rack, which can be placed in a wiring
closet with other equipment. To install, attach the mounting brackets on the Switch's front panel (one
on each side) and secure them with the screws provided.
Figure 2- 2. Attaching the mounting brackets to the Switch
Then, use the screws provided with the equipment rack to mount the Switch in the rack.
Installing Modules
The DES-6300 supports up to 6 modules that can be installed into the module bays. Networking
modules are warm-swappable, meaning they can be added and removed while power to the switch is
12