Modular L3 Ethernet Switch User's Guide
Figure 6- 213. Event Log window
Refresh
To refresh the front panel view:
♦ Select Services > Refresh.
♦ Press Ctrl+R.
♦ Click
Polling Configuration
Use this window to define how often (in milliseconds) the device is polled via SNMP protocol.
To define the SNMP polling frequency:
1.
Select Services > Polling Configuration. The Polling Configuration window opens:
Figure 6- 214. Polling Configuration window
2.
Enter the required polling configuration.
3.
Press OK.
or
or
. The front panel view is refreshed.
234