Switch Modules - D-Link DES-6300 User Manual

Modular L3 Ethernet Switch User's Guide

Switch Modules

The plug-in modules available for the switch are optional except for the CPU module. These modules are
described below:
CPU Module
A single CPU module must be present and must be installed in first (uppermost) slot.
Layer 2 support includes:
♦ Layer 2 switching based on MAC address & VLAN ID
♦ Store and Forward packet switching
♦ Broadcast Storm rate filtering
♦ Supports static filtering (based on MAC address)
♦ Supports IEEE 802.1Q VLAN (Static VLAN)
♦ Proprietary simplified Port-based VLANs
♦ IEEE 802.1d Spanning Tree support
♦ Address table: 64K MAC address per switch
♦ 96 Static VLAN Entries (in IEEE 802.1Q VLANs mode)
♦ Supports 802.1p priority queuing (2 priority queues)
♦ Port Aggregation (Port-Trunking) Capability
♦ Port Mirroring
♦ IGMP snooping
♦ Head Of Line (HOL) Blocking Prevention
♦ RS-232 port for out-of-band management and system configuration
♦ Telnet Remote Configuration
♦ TFTP software upgrades, settings file and switch log uploads
♦ NMS (Net Management System)
♦ CLI (Command Line Interface)
♦ SNMP Agents:
MIB-II (RFC 1213)
RMON MIB (RFC 1757)
Bridge MIB (RFC 1493)
Supports four RMON (1, 2, 3, 9) groups
♦ Port Security
♦ BootP support
Layer 3 support includes:
♦ Support for DHCP Client
♦ Support RIP1 and RIP2 routing protocol
♦ Support OSFP routing protocol
8