Des-6309 Gbic Module; Power Supply Modules; Led Indicators - D-Link DES-6300 User Manual

Modular L3 Ethernet Switch User's Guide

DES-6309 GBIC Module

Figure 3- 8. Two-port GBIC Module
♦ Two-port, front-panel module
♦ Connects to GBIC devices at full duplex
♦ Two GBIC Ethernet ports
♦ Fully compliant with IEEE 802.3z
♦ Supports full-duplex operation only
♦ IEEE 802.3x-compliant Flow Control support

Power Supply Modules

♦ Dual power modules design with current sharing design
♦ Full redundant feature design to ensure continuous operation—if one power module fails, the
other will take over all current supply automatically
♦ Hot-swappable/Hot-pluggable capability
♦ Power management functions
♦ Input: 90 ~ 264 VAC, 47 ~ 63Hz
♦ Output: 3.3V 80A maximum, 12V 2A maximum

LED Indicators

The LED indicators of the Switch include CPU Status and Power OK. The following shows the LED
indicators for the Switch along with an explanation of each indicator.
Figure 3- 9. CPU Front Panel LED Indicators
♦ CPU Status – This center indicator on the front panel displays the current status of the switch. The
LED will blink while the Power-On Self-Test (POST) is running during startup. It will light a steady
green after the POST test to indicate the switch is powered on and operating properly. It will light amber
when an error occurs during startup and the switch is therefore not functioning.
19