Configuring Quality Of Service; Global Parameters - D-Link DES-6300 User Manual

Modular L3 Ethernet Switch User's Guide
Figure 6- 175. Community Table Edit window
4. Complete the fields.
5. Click .
6. Close the Community Table Edit window. The Community Table opens.
7. Click . When the Status field displays "Finished!", the fields are confirmed as modified.
To delete a Community Table entry:
1. Display the Community Table.
2. Select an entry in the table.
3. Click . The entry is deleted.
4. Click . When the Status field displays "Finished!", the fields are confirmed as modified.

Configuring Quality of Service

This section describes the QoS menu and its options, including policies and creating, editing, and
deleting rules, IP classification fields, and policy profiles.
Quality of Service (QoS) allows network managers to improve the flow of network traffic based on
policies. Policies are comprised of profiles, classification fields, and rules.
The QoS menu has the following menu options:

♦ Global Parameters

♦ Profile Table
♦ Routed IP
Global Parameters
Note: To enable QoS, ensure that the auto-negotiation is disabled and that the output port is in full
duplex mode.
The QOS Global Parameters window allows you to enable or disable a policy on a device. Policies are
sets of profiles and rules that allow you to manage network traffic.
To display the QOS Global Parameters window:
♦ Select QOS > Global Parameters. The QOS Global Parameters window opens:
196