Playback; Display - ProScan PSVR87 User Manual

COMMERCIAL ADVANCE PLAYBACK
Press 2 to switch between Playback: AUTO and MANUAL.
• Select AUTO to have the VCR automatically advance
through the blocks of marked commercials.
* It works with most 30, 45, and 60-second commercials.
* A commercial group starting with the first two minutes or
last two minutes of a recording will not automatically be
skipped.
A commercial will not be skipped if a recording starts in the
middle of a commercial segment, one isolated commercial
is shown without others, or a commercial is longer than one
minute. Press FWD on the VCR (FORWARD on remote) to
scan through the commercial.
Part of a recorded program may be skipped if the program
segment is either between commercials and is less than one
minute, or there are frequent dark and quiet scenes in the
program. If this happens, automatic skipping can be
temporarily stopped by pressing PLAY (or STOP) on the
remote control while that portion of the tape is being
skipped. Then, reverse the tape back to a point just before
the segment starts and press PLAY. Automatic skipping will
be re-enabled after the VCR detects the end of the segment.
• Select MANUAL and the VCR won't advance through the
blocks of marked commercials until you press SEARCH.
If you press SEARCH during playback of material other than
commercials, the VCR advances to the end of the next "marked"
commercial block and resumes playback.
The VCR resumes playback when it reaches the end of the
marked commercials.
COMMERCIAL ADVANCE DISPLAY
Press 3 to switch between Display: BLUE or VIDEO.
• Select BLUE to display a blue background when the VCR
advances through the block of marked commercials.
• Select VIDEO to display the recorded video when the VCR
advances through the block of marked commercials.
48