ProScan PSVR87 User Manual page 34

TIMER RECORDINGS
|nu|_ili i Jllaall li_ m*i
2 Review Existing Progs.
3 Use VER PLus+ Code
O Exit
3. Select 1 to create a New Program.
How
often
should this
program record?
!
2 DaiLy (every day)
3 Weekdays (M-F)
4 Weekly (once per week)
0 Cancel
4. Select how often you want the program to record.
Program I (One time)
Channel --
Start Time --:--
End Time --:--
Start Date --/--/--
Tape Speed SLP
Press MENU to cancel
5. Enter the data for the program with the number buttons.
The data includes the channel number (press INPUT to
select the line input), start time including AM or PM, and
end time. The start date is automatically entered based on
the VCR dock. Both the date and speed can be changed.
6. Review the information to make sure it is correct, and then
press MENU to save.
Program I (One Time)
Channel 03 Cable
Start Time 08:00 PM
End Time 09:30 PM
Start Date 11/16/00 Thu
Tape Speed SLP
I=SP 2=SLP
Press CLEAR to correct
Press MENU to save
Program 1 has beefl saved
Remember to insert
a
recordabte tape and
turn the VCR off befoee
the program start time.
Remember to
Leave
your
cable box on.
Timer Recording Information
Clock must be set correctly.
Insert a tape with the safety tab in
place and enough tape to record
the program.
The output of your cable box
appears in the Channel item of the
timer recording menu if you've set
up theVCR for a cable box for all
channels.
PROGRAMS OVERLAP appears if
you have entered two programs
where the times overlap.
TIMER appears in the display when
you turn off the VCR and a timer
recording has been set. TAPE
flashes if there is no tape in the
VCR.
For cable box or satellite receiver,
turn it on and tune it to the
channel you want to record before
the recording is to begin.
32