Front Panel Brightness (Vcr Display); Tape Speed; Set Auto Repeat - ProScan PSVR87 User Manual

FRONT PANEL BRIGHTNESS
(VCR DISPLAY)
You can change the brightness level of the fluorescent display
panel on the front of the VCR. Press 5 to switch between the
options.
• AUTO brightens the display when the VCR is on and dims
the display when the VCR is off.
• BRIGHT keeps the display bright.
• DIM keeps the display at a low brightness level.
TAPE SPEED
You can select a preferred tape speed for recording. The speed
you select appears in the display panel and in the timer and VCR
Plus+ recording menus. Press 6 to switch between SP and SLP.
You can override the preferred tape speed:
• Press the SPEED button on the remote.
• Set the tape speed in the timer or VCR Plus+ recording
menu.
When you turn off the VCR, the tape speed reverts to the one
you have selected.
SET AUTO REPEAT
A tape can be set to play the same segment over and over in a
repeating loop with the Set Auto Repeat feature. Set Auto
Repeat uses the VCR's memory counter to determine the
duration of the loop.
In the PREFERENCESmenu, press 7 to choose Set Auto Repeat.
The Set Auto Repeat dialog box will ask for a loop end time to
be specified:
AUTO
REPEAT
Set the length of time
you want the tape to
play in a repeating loop
Loop from 0:00 to -:--
(h:mm)
Press CLEAR to turn off
Press MENU
to
exit
Tape Speeds
SP (Standard Play)
Gives the best quality recording,
but fewer programs can be
recorded on the tape. Special
effects such as pause, slow motion,
picture search, and frame advance
work well when you play back
tapes recorded in this speed.
SLP (Super Long Play)
Gives three times the recording
time of tapes recorded in SP.
Special effects such as pause, slow
motion, picture search, and frame
advance work well when you play
back tapes recorded in this speed.
RecordingTimes
Cassette SP SLP
T- 120 2 Hr 6 Hr
T-160 2 Hr/40 Min 8 Hr
(Continues on Next Page)
21