Additional Set Up Features In The Preferences Menu; Remote Vcri/Vcr2 Option - ProScan PSVR87 User Manual

ADDITIONAL SET UP FEATURES IN THE
PREFERENCES MENU
The features in this section are all accessed through the
PREFERENCES menu.
1. Press MENU to display the VCR MAIN MENU.
2. In the MAIN MENU, press 6 to select PREFERENCES.
PREFERENCES
2 Auto PLay: OFF
3 Auto TV/VCR: OFF
4 EnergySaver: 2:00
5 Front Panel: BRIGHT
6 Tape Speed: SLP
7 Set Auto Repeat
8 Commercial Advance
0 Exit
Now you are ready to select an item
from the menu to set up.
REMOTE VCR 1/VCR2 OPTION
The VCR's remote control unit can operate up to two
compatible Proscan, RCA, or GE VCRs. Most compatible VCRs
automatically respond to the VCR1 button without being
programmed. If you own two compatible VCRs, test them to see
if the VCR1 button turns on both VCRs. tf it does, then you may
want to program this VCR to respond to the VCR2 button on the
remote.
In the preferences menu, press 1 to select the Remote Control
feature. Then press the VCR2 button to change.
PREFERENCES
2 Auto Play: ON
3 Auto TV/VCR: ON
4 EnergySaver: 2:00
5 Front Panel: BRIGHT
6 Tape Speed: SLP
7 Set Auto Repeat
8
Commercial Advance
0 Exit
PREFERENCES
2 Auto Play: OFF
3 Auto TV/VER: OFF
A EnergySaver: 2:00
5 Front Panel: BRIGHT
6 Tape Speed: SLP
7 Set Auto Repeat
8 Commercial Advance
0 Exit
The VCR will only respond to the VCR2 button. To change the
remote setting back to VCR1, display the PREFERENCES menu,
press 1, and then press the VCR1 button on the remote.
Remote Control Option
Remember you must press VCR I
orVCR2 on the remot_
whichever you selected in the
menu--before the remote will
operate theVCR.
]
19