Recording - ProScan PSVR87 User Manual

RECORDING
If you want to record something that you're watching, you can
use basic recording.
1. Set the tape speed by pressing the SPEED button on the
remote. (See "Tape Speed" in Setting Up the VCR section for
information about tape speeds.)
2. Press the RECORD button to begin recording.
3. Press STOP to stop recording.
If you just want to pause the recording for a short time (like
during a commercial), press PAUSE instead of STOP.
CHECK THE SAFETY TAB
No matter which recording option you use, make sure there is a
tape in the VCR, and that the tape's safety tab is in place. You
cannot record on a tape with the safety tab removed.
Safety Tab
If the safety tab is removed and you want to record over it,
simply cover the hole with vinyl tape.
28