Vcr Channels List; Auto Channel Searching - ProScan PSVR87 User Manual

CABLE BOX SETUP
The VCR will now
receive all signals
from the cable box
on channel 04.
Press MENU
to continue
Once you complete the setup, the on-screen menus confirm
that the VCR will receive all signals on the designated
channel.
VCR
CHANNELS LIST
If you use a cable box for all channels, this step is not necessary.
Your VCR may come with a channel list preset at the factory.
Even though your VCR may come with such a list, it's possible
that you will want to add or delete certain channels depending
on whether they are active.
AUTO CHANNEL SEARCHING
1. Press MENU to display the VCR MAIN MENU.
2. Press 4 to display the CHANNELS menu.
CHANNELS
2 Add/Remove Channels
3 Signal Type: CABLE
4 VCR Plus+ Setup
5 Cable Box Setup
6
SAT Setup
0 Exit
Auto Channel Search
Use the Auto Channel Search
feature to place all available
channels in memory.
If you ever change cable or
antenna signals, you may need to
Auto Channel Search again.
W
3. Press 1 to display the AUTO CHANNEL SEARCH menu.
AUTO CHANNEL SEARCH
What type of signal
are you using?
1 Cable TV
2 Antenna
_ Fial'.llllmllllunllllm i_ m
0 Cancel
4. Select one of the three AUTO CHANNEL SEARCH options.
• Cable TVsearches for cable stations from a single channel
• Antenna searches for local broadcast stations on all channels
• Detect Automatically will make this decision for you
Detect Automatically
A strong cable or antenna signal
in your area may cause Auto
Detect to mis-detect. If this
should happen, select I or 2 for
the system you have.
}
12