RCA VR555 User Manual page 63

INTERNAL CLOCK SHOWS INCORRECTTIME OR DATE
• Power interruption.
• Check to make sure the dock is set accurately (check AM/PM and
date).
• Check Daylight-Saving setting. The clock may have adjusted for
daylight-saving time.
TIME DI D NOT ADJUST FOR DAYLIGHT-SAVING TIME
• Check to make sure daylight-saving feature is set correctly.
VCR MAKES NOISE WHEN STOPPED
• VCR is removing tape from heads. This is normal The head cylinder
inside the VCR will continue to rotate for a few minutes after you
put the VCR in the stop mode.
WILL NOT AUTO CHANNEL SEARCH ACTIVE CHANNELS
CORRECTLY
• Check to make sure the antenna connections are secure and correct.
• Check to make sure the Signal Type: CABLE/ANTENNA feature is set
correctly.
• If Detect Automatically was selected for the Signal Type in the AUTO
CHANNEL SEARCH menu, try using either CABLE TV or ANTENNA
instead.
• May not be necessary if using a cable box for all channels. Contact
your local cable company for more information.
TAPE PLAYS BACK IN SLOW MOTION
• PressPLAY to return to normal playback.
CANNOT SELECT CHANNELS OVER 69
• Cable channels over 69 can only be selected if Signal Type: CABLE/
ANTENNA feature is set to CABLE.
CASSETTE WITH SAFETY TAB REMOVED DOES NOT START
TO PLAY AUTOMATICALLY
• Check to make sure the Auto Play ON/OFFfeature isset to ON.
TIMER INDICATOR FLASHES
• Clock is not set.
• Check to make sure there is a cassette in the VCR when a timer
recording is set.
TIMER and RECORD indicators flash when the ProTect Plus
TM
Locking
feature is activated.
61