WARNING To reduce the risk of electric shock, do not remove To reduce the risk of fire or cover (or back). No user serviceable parts inside. electric shock, do not expose Refer servicing to qualified service personnel. this product to rain or moisture. This symbol indicates This symbol indicates "dangerous...
Description: The VCR's remote control can operate most brands of TVs with a tew programming steps. This remote control can operate most RCA, GE, and Proscan TVs without any programming at all. Requirements: Point tile remote control at tile active...
Page 4
Timer Recordings TIMER RECORDINGS Description: Your VCR allows you to progranl tip to eight different future Create Program Review Existing Progs. broadcasts to be recorded. You can catch a one-time, daily, or weekly broadcast Plus+ Code to record. Requirements: The VCR's clock must be set correctly. A tape with its sal_ty tab in place and enough tape to record a program nmst be inserted into the VCR.
@f C@ntents Product Registration ......................Introduction ..........................Key Features Overview ......................Connections & Setup ......................Things to Consider Before Connecting Components ............Cable Considerations ......................Choose Your Connection ...................... Using the RF Coaxial Cable to Connect the VCR to a TV ..........TV + VCR ..........................
Page 6
........................Cleaning the VCR ........................ Front Panel .......................... Display Panel ........................Back Panel ..........................RCA VCR Limited Warranty ....................How to Find Your TV's Video Input Channel ..............Advanced Connection ......................TV + VCR + Satellite Receiver ..................Glossary ..........................
C@nnect @ns Setup Things to Consider Before Connecting Components Protect Components From Power Surges • Conn.,or all components bdore plugging any power cords into the, wall outld. • Always turn off the TV and other components befbre you connect or disconnect any cables.
C@nnect @ns Setup Using the RF Coaxial Cable to Connect the The picture on the next page shows the RF coaxial cable supplied with your V('P,. VCR to a TV This will l)e the cable used tor the basic connections represented in this chapter.
C@nnect @ns Setup TV (back panel) CABLE/ FromCable 0rAntenna TV + VCR Note: Your television back panel may not look exactly like the model shown here. Connect the VCR to the TV Connect one end ot the supplied RF coaxial cable to the OUT TO TV jack on the l)ack of the \ CR and the other end to the TV's Antenna...
C@nnect @ns Setup SATELLITE RECEIVER IN FROMANT SATELLITE VIDEO From Cable From orTVAntenna Satellile TV + VCR + Satellite Receiver Note: Your television and satellite receiver back panel may not look exactly like the models shown here. Connect the VCR to the TV Connect one end of the supplied RF coaxial...
Page 12
C@nnect @ns Setu@ CABLEBOX IN FROMANT From CaMe Feed TV + VCR + Cable Box Note: Your television and cable box back panel may not took exactly like the models shown here. Connect the VCR to the TV Connect one end of the supplied RF coaxial cable to the OIT TO TV jack on the back of the VCR and the other end to the TVs Antenna input jack.
Turn on the TV and VCR Turn on tile TV and press the \ CR button on tile remote control to turn it on. Note: If you have an RCA, GE, or Proscan TV, your VCR's remote control may be able to operate it without being programmed.
C@nnect @ns Setup Using the Remote Control to Navigate On-Screen Menus The technical term is "Navigation" - how you move through the on-screen menus. The theory is the same tk)r all tile menu screens; use tile corresponding number button on tile remote control select it.
C@nnect:@ns Setup VCR Basics Once your initial settings are complete, you can begin using your VCtL In order to begin, first understand some basic concepts. :::List Playing a Tape Tune the TV to your VCR viewing channel (0?), 04, or the vide() line inpu0. Insert a tape in the VCR.
Using the VCR's Menu System Chapter Overview: • Setting Up the VCR's Preferences • Using On-Screen Menus • Cable Box Setup • Setting Time and Date • Setting VCR Preferences Changing Entertainment.
Using OnoSCreen Using On-Screen Menus to Set Up Features YOu set up many of the VCR's teatures by using the menu system as discussed in the previous section. Each lioature that appears in the QuickSet Guide is explained in this section as well as a [i.w other I>atures you should set up to get tile most out ot your VCt/.
OnoNCreen enus Select of the three choices. It 'ALL Channels" is selected, enter CABLE SETUP output channel of tile cable box (usually 03 or 04), or if A/V jacks connect your cable tile VCR to tile TV, press tile INP[T button on tile VCR's remote control.
Using OnoSCreen Changing the Signal Type This teature is usetul il your cable signal goes out; it allows you to switch to a regular antenna Ik)r alternate television receptinn. Press the MEN[ button to display the VCRMAINMt_%'7_ Press the 4 button to choose CIIA_%%qSLS.
OnoSCreen enus Time and Date Your VCR gives you two ways to set the time and date; manually or by using the Auto Clock Set [_ature. l_sing Auto Clock Set enables the time to be updated each time the VCR is turned ol] by using time and date inlk)rmation carried in certain broadcast signals.
Using OnoSCreen Setting Daylight-Saving Time Press MENU to display the VCR MA13,_MENU. Press 3 lo choose 2IMtL Press 4 to choose SET1)AYLIC_FI'SAV13,*(d. Select the appropriate option. DAYLIGHT SAVING Notes: DST stands for Daylight-Saving Time, area Does your observe Daylight Saving Time If you choose Automatic for the time zone, the VCRsets the clock using any from...
Some unfversal remote controls have butlons labeled VCR1 and VCR2. These remotes can operate kip lo two VCRs. If you have a universal remole control with this ability, your RCA VCR can be controlled with either tile VCR1 or VCR2 button. See the documentation lhat came with your universal remole control t_>rdetails about progranm_ing it lo control your RCA VCR.
Using OnoSCreen EnergySaver PREFERENCES Remote Control: VCRI Auto Play: By del_tult, lhe VCR automatically turns off atier two hours of inactivity. This can Auto TV/VCR: be changed in tile I)RFd_ERt'_)_iCES menu by pressing lhe 4 bullon repeatedly EnergySaver: 2:00 Front Panel: BRIGHT change the time delay or to disable the l>ature altogether.
OnoSCreen enus Set Auto Repeat AUTO REPEAT A tape can be set to play the same segment over and over in a repeating loop length time want tape with the Set Auto Repeat fl,ature. Set Auto Repeat uses the VCR's memory play a repeating loop...
Using the Remote Control Chapter Overview: • Buttons on the Remote Control • Programming the Remote Control to Operate Other • Using a Programmed Remote Control Changing Entertainment.
The remote conlrol is capable of controlling more than just your VCR. If you have compatible RCA, GE, or Proscan TV, you may be able to control it without having to program tile remotu. If you have another brand of TV, your VCR's remotu control may be able to operate it once it has been programmed.
Reduces picture "jitler" during play-pause mode. Puts the remote control in TV-operating mode. This bulion will automatically mrn on most RCA, GE, and Proscan TVs, TV/VCR _R)ggles the VCR between TV and VCR-viewing modes. Puts the remote control in VCR-operating *node.
TV buNon (this puts lhe remote control ink) TV operating mode and should automatically turn on most RCA, GE, and Proscan TVs). Press tile remote conlrol's ON • OFF button lo see if the TV responds to tile command. If not, tile remol_"...
Using the VCR's Features Chapter Overview: • Recording • Express Recording (XPR) • Program Express • Timer Recordings • Using the VCR Plus+ SILVER System • Copying and Editing Tapes Changing Entertainment. Agai...
Features Recording Features Your VCR provides many ways to capture programming: 1. Recording lets you press one button to record a program. 2. Express Recording (XPR) allows recording to start while a program is being watched. This l)ature automatically stops recording after a designated period of time.
Features Timer Recording You can program up to eight diflbrent broadcasts to be recorded. Notes- In order for a timer recording to work: TIMER RECORDINGS • The VCR's clock must be set correctly. Create Program • Insert a tape with its safety tab in place and enough tape to record Review Existing Progs.
Features VCR Plus+ SILVER System The VCR Plus+ SILVER system makes VCR set up easier by setting and updating the clock and channel list t_)r you automatically. During the first-time QuickSet Guide setup, the VCR prompts you to enter your zip code. Soon al_er, the VCR clock will set itself and your VCR Plus+ syst_,m channel list will be input 12>r you.
Features Mapping VCR Plus+ Channels Manually Using the VCR Plus+ SILVERsystem can make taping timer recordings l_n_cable or off-air antenna easier. If your VCR Plus+ SILVERsystem setup t;ailed during the QuickSet, then you will need to map the channels lkn"your local service manually. A worksheet and abbreviated codes for typical cable services in the U.S.
Page 38
Features Two-Digit VCR Plus+ System Two-Digit VCR Plus+ System Channel Numbers Channel Numbers (CanadianList) Cable TV (USA List) Cable TV 35 ....American Movie Classics 67 ....Allarcom Pay "Iidevision/ 39 ......Arts &-Enlertainmen! Supewhannel 57 ......Black Enlertainment 44 ......Arts &...
Features VCR Plus+ System Worksheet Broadcast Channel Number VCR Plus+ System You Receive file Cable-TV Channel Number** Station Name Station ESPN *Check your local or cable listings for the channel number _ou receive this station on. **Check your total listings for broadcast or VCRPlus+ channel number assigned.
Features Copying and Editing Tapes Using Two VCRs Caution: [se one VCR as the plc{FhaclaVCR and the other as the rt,cording VCR. Turn on the TV and VCRs. The unauthorized recording satellite broadcasts, television Tune the TV to the VCR viewing channel (either 03, 04, or the video line programs, or other copyrighted input).
Features Slow Motion You can view a tape during play or play-pause mode using slow motion. In pausv mode, press the FORWARD or REVERSE bunon to start slow-motion playback. Press the FORWARD buuon to increase search speed or the REVERSE button to decrease search speed.
Features Press FORWARD (FWD) to search forward or REVERSE (REV) to search in INDEX SEARCH reverse. The VCR will locate your index mark and begin playback. If you Searching did not enter a specific index number, the VCR will locate the nexl index index marks...
Features Tracking Your VCR has automatic tracking which removes streaks and "noise" l_comthe picture. Automatic tracking is actival*.d when you insert a tape or turn on the VCR. Occasionally you may need to manually adjust tracking, especially if the tape was recorded on a diff'.rent VCR.
Features On-Screen Displays Stop 0:30:00 The INFO button displays the status of the VCR (Stop, Play Record, etc.) as well as the channel number, time counter position, dal% time, and tape speed on the TV screen. Note: The date and time must be set before they can be displayed. 11/18/00 01:30PM Press the INFO butlon to show the on-screen...
Other Information Chapter Overview: • Troubleshooting • Specifications • Care and Cleaning • Front, Rear, and Display Panel Diagram • Warranty Information • Finding the TV's Video Line Input • Glossary • Index Changing Entertainment. Agai...
Troubleshooting Tips In this section, you will find answers to common recording, playback, and general VCR questions. Consulting with this section first when there is problem may help you answer common questions. General VCR Problems No power • Check to make sure it is plugged into an operating ()tltl('t.
Recording Problems Will not record • Check to make sun, there is a tape in the VCR. • "Fryejecting and reins(,rting lh(, cassette. • Check to make sure tile tape is not broken, • Check to make sure tile VCR is not in pause mode. Press PAUSE or PLAY to return to normal playback. •...
Page 48
Time counter not working or time counter not working in search modes • The time counter does not advance during unrecorded portions of tape, When an unrecorded segment of tape is encounl_,red, tile time counter will hold its count until recorded material is detected again.
Front Panel CHANNEL,TRACKING and Up (A) and Down (V) Selects next higher or lower channel in tile VCRs channel memory. Adjusts tracking when a tape is playing. F_glD Fast-tk)rwards tile tape when the VCR is in stop mode. Searches tile picture tk)rward during playback.
Display Panel Clock/Counter Displays current time, time counter, tape speed, or channel numbers when switching channels. FUNCTION DISPLAYS: dn& (Down and Load) Front panel display alternates between these two words when time data is being downloaded. REC (Recording indicator) "llle VCR is recording. REC flashes on the flcont panel display when a recording paused.
ANT IN RF OUT Back Panel ANT. IN jack Receives an antenna or cable system signal when tile VCR is attached using RF coaxial cables. AUDIO and VIDEO IN jacks Receives signals from another component (such as a VCR or camcorder) when connected to these jacks.
RCA VCR Limited Warranty What your warranty covers: Any def_,ct in materials or workmanship. For how long after your purchase: 90 days fi)r labor charg('s. One year fi)r parts. warranty period tk)r rental units begins with first rental or 45 days...
The video line input R>rTVs varies by brand and model. I3elow are some steps to try to find your TV's video line input: • If your TV brand is RCA, GE, or Proscan, press tile TV bulton on tile VCR's remote control, then press tile INPUT buuon. REVERSE...
Advanced Connection TV + VCR + Satellite Receiver • Cables: A/V and RF Coaxial Note: Your satellite receiver and television back panels may not look exactly like the models shown here. This connection can also be used for a cable box. Connect the VCR to the TV Connect...
Glossary A/V Jacks & Cables Commonly called "RCA-type" cables. Improves picture and sound quality over RF Coaxial cables. EnergySaver Automatically turns the VCR off at:t_,ra user-defined period of inactivity. Express Recording (XPR) A method of timer recording which tapes l_r a set period of time using 30-minute, increments.
Page 60
Please do not send any products to the Indianapolis address listed in this manual or on the carton. This will only add delays in service for your product. Thomson multimedia Inc. 10330 North Meridian Street Indianapolis, IN 46290 02001 Thomson Consumer Electronics, Inc.