Table of Contents
Advertisement
INDEX
SEARCH
The VCR has a "VHS Index Search System" that automatically
records an index mark on the tape every time you start a
recording.
During playback you can locate the program
you want to play
by the number
of index marks or by scanning. The VCR will
search forward
or reverse from the location you are on the tape.
To Search:
1.
Press STOR
2.
3.
4.
Press SEARCH on the remote to display the INDEX SEARCH
on-screen display.
If you want to search through
a certain number of index
marks, press two number
buttons to enter the number of
marks you want to search. Press CLEAR on the remote to
correct an entry.
Press FWD to search forward
or REV to search in reverse. The
VCR will locate your index mark and begin playback. If you
did not enter a specific index number, the VCR will locate the
next index mark and begin playback.
5.
Press STOP to end index searching.
Some index marks may be missed by the VCR:
•
A mark too close to your location on the tape
•
The mark at the beginning
of a recorded segment of five
minutes or less
•
The first index mark on the tape when you start at the
beginning
of the tape.
ZERO SEARCH
The zero search feature
enables the VCR to quickly return to a
counter
reading of 0:00:00 anywhere
on the tape. This is
especially convenient
when you want to repeat a segment of the
tape several times,
1.
Go to the beginning
of the program
you wish to return to.
2.
Press INFO twice
to display the time counter
on the TV
screen.
3.
Press CLEAR to reset the counter to 0:00:00.
ZERO
SEARCH
Current
tape
counter
is
2:17:25
Press
REV to
go to
O:O0:O0
Press
SEARCH
to
exit
46
Advertisement
Table of Contents
