Table of Contents
Advertisement
Using
the
Playback
Features
Index
Search
The VCR has a "VHS Index Search System" that automatically
records
an index mark on tile tape
every time you stop and then start a new recording.
During playback
you can locate the program
you want to play by the number
of index marks.
The VCR will automatically
locate the index number
you select,
The VCR will search forward
or
reverse from the location you are on the tape.
1. Insert the prerecorded
tape and press STOP.
2. Press SEARCH on the remote to display
the INDEX
SEARCH menu on the TV screen.
8. Press two number
buttons
to enter the number
of index
marks you want the VCR to search.
Press CLEAR to correct an entry.
4. Press FF on remote or turn the shuttle ring clockwise
toward
FWD on the VCR to search forward.
Press REW on remote or turn the shuttle
ring
counterclockwise
toward
REW on the VCR to search in '
reverse.
5. Press STOP to stop index searching.
Some index marks may be missed by the VCR.
• A mark too close to your location on the tape.
• The mark at the beginning
of a recorded
segment
of
five minutes or less.
• The first index mark on the tape when you start at
the beginning
of the tape.
INDEX
SEARCH
Enter
Index
number
01
Press
FWD
or
REW
Press
SEARCH
to
exit
0:30:00
Time
Search
The VCR will search forward
or reverse the amount
of time you select from the
location you are on the tape.
1. Insert the prerecorded
tape, and press STOP.
2. Press SEARCH on the remote twice to display
the
TIME SEARCH menu on the TV screen.
TIME
SEARCH
Enter
search
time
0:30
Press
FWD
or
REW
Press
SEARCH
to
exit
3,
4,
Press number
buttons
to enter the hour(s) and
minute(s)
of the time counter reading
you want the
VCR to search.
Press CLEAR to correct an entry.
Press FF on remote or turn the shuttle ring
clockwise
toward
FWDon the VCR to search
forward.
Press REW on remote or turn the shuttle ring
counterclockwise
toward
REW on the VCR to
search in reverse.
5. Press STOP to stop time searching.
28
Advertisement
Table of Contents
