Setup Menu - Maytag MEW9530AB00 Use & Care Manual

3. Press the quickset pad below the desired option, or press
START to begin the cooking function.
4.
upper bake
_ress start when ready
Temp ! timer: I delay: 350 ° not set not set
II II
(Optional) If a Cook Time is desired, use the number keypad
to enter the cook time, then press the quickset pad below
OK. If a cook timer has been previously set, it is possible to
cancel it by pressing the quickset pad below Cancel Timer.
If a cook time is entered, the oven will play a sound when the
time expires. See the "Cook Timer" section for additional
information.
upper bake
use keypad to enter cook time (0 - 12 hrs)
timer: :
: hr :min: sec
back I ok !
I II II I
5. (Optional) If desired, the When Done and Delay Start options
can be programmed. See the "Delay Start" section for more
information, or see the section for the desired cooking cycle
for additional information on the When Done option.
6. Press START to begin preheating oven.
7. Place food in oven when the preheat signal sounds. The
screen will also prompt you when to insert food. If a delay
start is programmed, place food in oven when setting the
mode.
8.
g.
Food Poisoning Hazard
Do not let food sit in oven more than one hour before
or after cooking.
Doing so can result in food poisoning or sickness.
NOTE: Do not use Delay Start for items that require a
preheated oven, such as cakes, cookies and breads. If food
is in the oven during preheat, it may become overcooked.
To change the temperature or cook time while the oven is
active, press the appropriate quickset pad, make the
adjustment, and press START.
Press CANCEL (UPPER CANCEL or LOWER CANCEL on
double models) to turn off the oven.
Your oven provides you with the ability to control several of the
default settings and access information through the on-screen
display. These include: Clock, Volume, Brightness, Language,
Temperature Units, Power Preheat, Convect Conversion, Timer
Entry Format, Sabbath Mode, Demo Mode, Service Information,
Oven Calibration and Restore Default Settings.
To Access Setup Menu:
1. Press SE-I-I-INGS.
2. From the Select Mode menu, press the arrow keys until you
see the Setup Menu choice.
3. Press the quickset pad below the desired choice.
Clock
This clock can be used in 12-hour or 24-hour format.
At any time desired, press the quickset pad below Back to return
to the Setup Menu.
1. Press SE-I-I-INGS. Clock will appear on the display. Press the
quickset pad below Clock.
2. From the Set Clock menu, use the number keypads to enter
the current time.
3. Choose AM or PM or 24 hour by pressing the quickset button
below AM/PM/24 hr.
4. Press the quickset pad below Ok. This will return you to the
Settings Menu.
Volume
1. Press SE-I-I-INGS. Volume will appear on the display. Press
the quickset pad below Volume.
2. From the Volume menu, press the quickset pad below Button
Volume.
3. Adjust the Button Volume by pressing the left arrow key to
decrease the volume, or the right arrow key to increase the
volume. To turn Button Volume off, press the left quickset pad
until Off is reached.
4. Press the quickset pad below Ok. This will return you to the
Volume Settings Menu.
5. From the Volume Menu, press the quickset pad below Alert
Volume.
6. Adjust the Alert Volume by pressing the left arrow key to
decrease the volume, or the right arrow key to increase the
volume. To turn off Alert Volume, press the left quickset pad
until Off is reached.
7. Press the quickset pad below Back. This will return you to the
Settings Menu.
Brightness
1. Press SE-I-I-INGS. Brightness will appear on the display. Press
the quickset pad below Brightness.
2. Adjust the screen brightness by pressing the left arrow key to
select dimmer and the right arrow key to select brighter.
3. Press the quickset pad below Ok. This will return you to the
Setup Menu.