Tape Operation - Panasonic Omnivision PV-M2048-K Operating Instructions Manual

Combination vcr
Table of Contents

Advertisement

J o o Tape Operation
t,, o.w. ,_
*Important:
If the remote control POWER, CH A_!I' , ACTION, PROG, INDEX, ON-TIMER,
R-TUNE, FMITV and ADD/DLT
button does not work when pressed, press the TVNCR
button on the remote and try the button again.
VHS Index Search System
Each time you start a recording,
an invisible index mark is placed on the tape. When timer recordings
are
made, program index and program
information
(see =Time Stamp Feature"
on page 22) are also included.
You can then use these index marks to access or scan your recordings.
Model PV-M2058 unit is shown here.
REWIND
FAST FORWARD
4
4
Direct Accesslndex
Search
(For normal and/or timer recordings.)
This feature allows you to go directly to the recording you want from
anywhere on the tape by entering the appropriate index number.
1
Press INDEX* in Playback or Stop
mode to display the INDEX screen.
• This screen appears only if there are timer
recordings on the Program Index list. If this
screen does not appear, go to step 3.
2
Press AV to select "INDEX
SEARCH," and then press
to display the INDEX screen.
O Press a NUMBERED key to
select the desired recording.
• To calculate the number, see below.
4
Press REW or FF to start a
reverse or forward search.
• When the designated location is reached,
the Combination VCR goes into Playback
mode.
I NDEX
PROGRAM
INDEX
SEARCH
SELECT:&
KEY
SET
:1_ KEY
END
: INDEX KEY
,N° I
i.aEx
04
1
REWIND
4
24
3
FORWARD
4
Model PV-M2058 remote
is shown here.
To calculate
the Index Number
Count forward or backward each recording start point, including
the recording you want to see, from wherever you are on the tape.
Example
1:
If you are watching recording 4 and you want to watch recording 2, count the
start points to number 2. The total is 3. Enter 3 in step =3" and press REW.
Example
2:
.
,
If you are watching recording 2 and you want to watch redording 6, count
the start points to number 6. The total is 4. Enter 4 in step "3" and press FF.
NOTE: _ indicates start points of each recording.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Omnivision pv-m2058Omnivision pv-m2048

Table of Contents